VAG DASH COM+CAN

VAGdashCan USB EDC16 per OBD EEprom Audi VW Touareg Phaeton usw...

NEW: EDC16 / EDC15 / ME7 per OBD den EEprom Lesen und Schreiben (EDC15/ME7 komplett EDC16 derzeit KM stand wird standig erweitert.
 

This high-performance tool covers up the new generation of instrument clusters from 2002.
Included are GolfV,Touran, Passat B6, Jetta, the new Seat models, such as Altea II and the new Skodas.
This high-performance tool for VW / SEAT /SKODA cars enables you to:

recalibrate the odometer

add keys to the car even though you don't have all existing keys available

do key adaptation without 5 minutes delay on new keys

read out the login / secret key code (SKC)

write the vehicle identification number and the immobiliser number

download and store the entire immobiliser block decrypted

clone instrument clusters by writing the immobiliser block from a file

read out trouble codes of CAN-ECUs and erase them

Those functions are absolute unique and give you the chance to earn the money when you normally have to send away your customer.

An example:
a customer wants an additional key adapted to his car.
The normal diagnostic procedure requires that all adapted keys are available.
Unfortunately your customer brought only one key along.
At this point you have to send your customer away (and with him his money ...)
Not with VAGdashCAN.
You can add a key to the existing ones without erasing them. You start the procedure with the new key and after some seconds it is adapted to the car.
You don't have to wait 5 minutes for the adaptation channels to become reachable.

Another example:

A customer wants to change his instrument cluster. Normally this is procedure with a lot "ifs and buts".
Not with VAGdashCAN, because you are beyond standard diagnostic procedures!
Just read out the origin immobiliser block and store it. Then you change the instrument cluster and write the origin immobiliser block into the new cluster. That's it.
No further adaptations are necessary.
You don't need new keys.
You don't have to care for immobiliser type classes

Supported Cars: 
Audi A4  Bosch RB4 2001 - 07.2005
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
Audi A3  VDO 2003 - 2004  KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Touareg Phaeton  VDO  KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Golf V  VDO 2003 + KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Touran  VDO 2002 +
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Caddy  VDO 2003 +
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Jetta  VDO 2003 +
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Passat B6  VDO 2004 +
 KM-Stand 
VW Eos  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Individual  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
VW Crossgolf  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
SKODA Octavia II  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
SKODA Scout  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
Skoda Roomster  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
SEAT Altea XL  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
SEAT Altea  - 07.2006
 KM-Stand,Login,Schlusseldirektanlernungsfunktion 
SEAT Leon  VDO 2005 +
  uninstall the vagdash software first if you installed it before
connect the vagdash cable with the computer
install driver first. make sure select USB port, NOT COM port!
then install the software.
 

KM-Stand,Login,Schlusseldirektanlernungsfunktion 

Software Installation